Conductive Carbon INK
DESCIPTION CAPITON: Conductive carbon INK YH-CCI-601CA is
a screen printed ink used in the fabrication of membrane
switches, flexible circuits and to print circuits and to
print circuits on a variety of substrates. It possesses
low shelf resistance <20Ω/□ (25μm), and can be easily
cured at 120℃ for 30 min.
The recommend cure for YH-CCI-601CA is 120℃ for 30
min；Curing at room temperature for 3-4H
Also in IR tunnel: 120℃ for 3～5 min
Washing up: before printed, the surfaced grease and
oxide must be cleaned completely.
Mixing: Ink must be agitated thoroughly before
use, meanwhile, the agitation speed cannot be too high so
as to avoid bubbles.
Dilution: use dilution agent YH-CCI-601CA-30P or YH-5
of CAPITON COMPANY
PERFORMANCE METHOD: use general silk screening technique
Silk screen: Monofilament polyester meshes of 36-
100T(90-250 hole) or stainless meshes of 60-120T(165-300
Scraper: 60-75o polyurethane Scraper
Silk screening machine: manual, semi-automatic, full-
automatic operated machine
Washing up: butanone(MEK),cyclohexanone,783 etc.
STORAGE: When stored in sealed containers in a cool,
vented, dry place(<10℃),Capiton Conductive carbon inks
have a 6 month shelf life.
If Conductive carbon inks is swallowed as
mistake, it must be cleaned completely and immediately.
It is harmful to breathe into body and touch with skins.
Please put away far from fire and inflammable objects.
When disused, the container cap must be tighten, and
while used the room must be kept vented.